Total Oil

Seriola 32

Heating of domestic and industrial premises, Production of steam and hot water, Air conditioning, Temperature control for storage bins, Heating by heat exchange, All types of systems (piping, pumps, etc…), Heating of heat treatment baths, autoclaves, reaction vessels, furnaces, dies,  tunnel driers, injection moulding machines, Manufacturing processes (cement works, paper mills, timber industry, etc…).

Seriola 3120

Heating of domestic and industrial premises, All types of systems (piping, pumps, etc.), Production of steam and hot water, Heating of heat treatment baths, Temperature control for storage bins, Manufacturing processes, Heating by heat exchange, Operational temperature: from -20℃ to 300℃.

SERIOLA 1510

SERIOLA 1510 is formulated with selected basestocks which own the following properties: – good thermal stability. – high flash point. – high viscosity index

SERIOLA AB

SERIOLA AB is suitable for heating, temperature control in all industries, and in particular for the following manufacturing processes : – steam production – paper – wood – textile – oil & gas

SERIOLA CLEANER

SERIOLA CLEANER has a high detergency and dispersiveness level ensuring an efficient cleaning of the heat transfer circuit. Excellent thermal stability.
SERIOLA CLEANER is completely miscible with all mineral-based heat transfer oils.

CERAN XM 460

CERAN XM 460 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubricants. This new soap has enhanced properties in terms of water and thermal  resistance, load capacity, anticorrosion properties while keeping a very high level of pump ability and ability to lubricate well in case of high loads.

CERAN AD PLUS

is a adhesive heavy duty grease designed for use on slide rails, metal cables, wire ropes, winches, small open gears and chains working under severe circumstances.

CERAN XM 460

is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of industrial, marine and off shore applications, operating under the most severe conditions. (water,heat, dust and other pollution).

AZOLLA ZS

Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment.

ALTIS EM 2

Suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of extraction fans for hot gas or steam, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high.

PRESLIA

specially designed for the lubrication of hydraulic, steam or gas turbines. They can also be used in centrifugal compressors or turbochargers.

Preslia SE JET

Lubrication and regulation of extremely high-performance aeroderivative turbines.

ALTIS SH 2

is a top of the range synthetic grease designed for factory fill and sealed-for-life applications.Also suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high and/or low.

CARTER EP

Has been specially designed for lubricating enclosed gears operating under severe conditions:

– level and spur gears

– bearings and gear couplings

– worm gears.

CARTER SH

has been developed for enclosed industrial gears to provide  optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

CARTER SG

Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).

CARTER EXP

CARTER XEP is a new generation of high-performance lubricant for heavily loaded
reducers. The severest technical specifications were taken into account during the
development of this product especially regarding micropitting protection and
anticorrosion properties. The specific CARTER XEP additivation reduces considerably
the wears of gears and mechanisms.

CARTER 100

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears

CARTER 150

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears.

CARTER 220

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears.

CARTER 320

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears.

CARTER 460

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears.

CARTER 680

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears.

CARTER 1000

CARTER has been specially designed for lubricating enclosed gears operating under
severe conditions:
– bevel and spur gears
– bearings and gear couplings
– worm gears.

DACNIS SH

⚫ Lubrication and cooling of the following types of air compressors:
– rotary screw compressors (ISO VG 32, 46, 68)
– reciprocating compressors (ISO VG 100).
⚫ Recommended whenever the discharge temperature exceeds 90°C and/or the discharge
pressure exceeds 10 bars.
⚫ Recommended for the lubrication of gears, plain and roller bearings working under
severe conditions, where a CKS level is required.

DACNIS SE

DACNIS SE is a high performance lubricant developed for lubrication and cooling of
the following types of air compressors:
– high pressure reciprocating air compressor (ISO VG 100)
– screw and rotary vane air compressor (ISO VG 46, 68 or 100)
– turbocompressors (ISO VG 68)
– vacuum pumps (ISO VG 100).

DACNIS VS

⚫ Mineral oils with specific additivation for lubrication of lubricated rotary air compressors.
⚫ DACNIS VS is characterized by its longer drain interval, which can reach 3000-3500h for
lubricated rotary compressors, under standard conditions of use.
⚫ Use under conditions in which the discharge temperature does not exceed100°C.
Beyond this, the use of synthetic lubricant is advised.

DACNIS

⚫ Mineral oils with specific high performance additives designed to lubricate screw and
reciprocating air compressors:
. for screw compressors : DACNIS 32, 46, or 68
. for reciprocating compressors : DACNIS 68, 100 or 150.
⚫ For use in conditions where the discharge temperature does not exceed 100°C,
otherwise, the use of synthetic oils is preferred.

DACNIS LPG 150

Lubrication of rotary compressors of LPG hydrocarbon gases or liquefied natural gases LNG
such as:
– methane, ethane, ethylene, propane, propylene, butane, butylene, butadiene, as well as
chemical gases such as:
– ammonia, vinyl chloride monomer.

RUBIA TIR 7400  15W-40

Mineral lubricant suitable for on-road diesel engines.

RUBIA TIR 6400 15W40

P E R F O R M A N C E S A N D C U S T O M E R B E N E F I T S
Detergent, antioxidant and anti-corrosion additives help to reach standard oil drain intervals defined by the
manufacturer.
Detergent, dispersant and anti-wear properties keep the engine clean and enable efficient control of soot,
sludge and piston deposits.

RUBIA TIR 7900 15W-40

TOTAL RUBIA TIR 7900 15W-40 is adapted to on-road diesel technologies (heavy-duty, urban transport,
delivery…).
It is also compatible with certain gas engines.

RUBIA TIR 7400 20W50

TOTAL RUBIA TIR 7400 20W-50 contains excellent viscosity stability in service, guaranteeing effective engine
lubrication in severe conditions.

RUBIA TIR 8600 10W40

High quality synthetic base stocks combined with high-performance additives make TOTAL RUBIA TIR 8600
10W-40 an excellent performance lubricant, allowing smooth cold starts.

RUBIA TIR 8600 CI 10W40

TOTAL RUBIA TIR 8600 CI 10W-40 is super premium quality heavy-duty engine oil that provides outstanding
performance in the most severe diesel and gasoline engine applications.

RUBIA TIR 9200 FE 5W30

TOTAL RUBIA TIR 9200 FE 5W-30 is a synthetic high-performance lubricant used in on-road diesel heavyduty applications.

RUBIA FLEET HD 500 SAE (10W30,15W40,20W50)

TOTAL RUBIA FLEET HD 500 10W-30 / 15W-40 / 20W-50 is recommended for all turbocharged or naturally
aspirated diesel engines of commercial vehicles (trucks, buses, vans, pick-ups, taxis…), and for all off-road
applications (public works, agriculture, navigation, rail road) requiring API CH-4 performance.

RUBIA FLEET HD 300 SAE (15W40,20W50)

TOTAL RUBIA FLEET HD 300 15W-40 / 20W-50 is recommended for all turbocharged or naturally-aspirated
diesel engines of commercial vehicles (trucks, buses, vans, pick-ups, taxis…), and for all off-road applications
(public works, agriculture, navigation, rail road) requiring API CF-4 performance.

RUBIA FLEET HD 200 SAE (15W40,20W40,20W50)

TOTAL RUBIA FLEET HD 200 is recommended for all turbocharged or naturally-aspirated diesel engines of
commercial vehicles (trucks, buses, vans, pick-ups, taxis…), and for all off-road applications (public works,
agriculture, navigation, rail road) requiring API CF performance.

RUBIA FLEET HD 200 SAE (10W,30,40,50)

TOTAL RUBIA FLEET HD 200 10W / 30 / 40 / 50 is recommended for all turbocharged or naturally-aspirated
diesel engines of commercial vehicles (trucks, buses, vans, pick-ups, taxis…), and for all off-road
applications (public works, agriculture, navigation, rail road) requiring API CF performance.

RUBIA ST 415

All diesel turbocharged or normally aspirated engines operating in the most
severe conditions, especially for use with high sulphur content fuel oils.

RUBIA WORKS 2000 10W40

TOTAL RUBIA WORKS 2000 10W-40 is especially suitable for engines used in earthmoving activities (quarrying,
construction, mining). Furthermore, it is perfectly adapted to on-road truck engines, thanks to its numerous approvals.
This lubricant withstands very long working periods under severe conditions and high load, with dust and heat.

RUBIA WORKS 1000 15W40

TOTAL RUBIA WORKS 1000 15W-40 is especially suitable for engines used in earthmoving activities (quarries, construction,
mining…). Furthermore, thanks to its numerous approvals, it can be used also in on-road truck engines.

CIRKAN RO

are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions: 

– fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.

– viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties. 

ISOVOLTINE II-T

is a Traced Inhibited Naphthenic base mineral oil for transformers, rheostats and circuit breakers using mineral oils.

CORTIS XHT 245

is a synthetic oil that is particularly suitable for lubricating moving parts operating at very high temperatures.

LACTUCA LT 2 AP

is specially designed for traditional machining of copper alloys and bar turning. LACTUCA LT 3000 provides also full satisfaction for all operations on fine carbon steels.

MULTIS COMPLEX EP 2

is designed for the lubrication various applications in all types of operating conditions, but particularly where the operation temperature is high and the use of conventional lithium greases is limited.

MULTIS EP 00

is especially developed for the lubrication of closed gears, can also be used for chassis lubrication by means of a centralized system for which  NLGI 00 grade greases are recommended.

NATERIA MH 40

Lubrication of engines in power generation plants, with or without cogeneration, when the manufacturer requires an oil ash content up to 0.5 %.  

EQUIVIS ZS

recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature.

Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.

HYDRANSAFE HFDU 46

Biodegradable fire resistant hydraulic fluid

Recommended for hydraulic equipment operating in
locations comprising a fire risk such as iron and steel works (coking plants, blast
furnaces, continuous casting), mines, etc….

HYDRANSAFE FR EHC

High performance fire-resistant phosphate ester based hydraulic fluid.

Especially designed for use in electrohydraulic
governor systems of steam turbines, including systems using fine tolerance
servo valves.

HYDRANSAFE HFC 146

High performance synthetic water-polymer, fireresistant hydraulic fluid.
Regulation and hydraulic circuits of Furnaces, Continuous Casting Units in the
Steel and Aluminium Industry, Heat-treat Ovens for quenching operations,
Drying Furnace and other applications in fire risk areas, as in mining industry…
Hydraulic systems of mould injection machines.