Seriola 32

Heating of domestic and industrial premises, Production of steam and hot water, Air conditioning, Temperature control for storage bins, Heating by heat exchange, All types of systems (piping, pumps, etc…), Heating of heat treatment baths, autoclaves, reaction vessels, furnaces, dies,  tunnel driers, injection moulding machines, Manufacturing processes (cement works, paper mills, timber industry, etc…).

Seriola 3120

Heating of domestic and industrial premises, All types of systems (piping, pumps, etc.), Production of steam and hot water, Heating of heat treatment baths, Temperature control for storage bins, Manufacturing processes, Heating by heat exchange, Operational temperature: from -20℃ to 300℃.

Ceran XM 460

CERAN XM 460 is made of the NEW GENERATION calcium sulfonate complex soap designed by TOTAL Lubricants. This new soap has enhanced properties in terms of water and thermal  resistance, load capacity, anticorrosion properties while keeping a very high level of pump ability and ability to lubricate well in case of high loads.

Preslia SE JET

Lubrication and regulation of extremely high-performance aeroderivative turbines.

AZOLLA ZS

Designed for use in all kind of hydraulic sytems running under the most difficult conditions, such as in machine tools, mould injection machines, presses and other industrial or mobile equipment.

ALTIS EM 2

Suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of extraction fans for hot gas or steam, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high.

ALTIS SH 2

is a top of the range synthetic grease designed for factory fill and sealed-for-life applications.Also suitable for lubrication of bearings, slides, racks subjected to high temperatures in dry and mildly humid environments, bearings of electric motors, generators, bearings of dryers, pumps, oven conveyors, and all other applications where rotation speeds and temperatures are high and/or low.

CARTER EP

Has been specially designed for lubricating enclosed gears operating under severe conditions:

– level and spur gears

– bearings and gear couplings

– worm gears.

CARTER SH

has been developed for enclosed industrial gears to provide  optimum gear protection against micopitting and bearing protection against scuffing under very severe conditions.

CARTER SG

Lubrication of gears operating under the most severe conditions (high loads, shocks, extreme temperatures and corrosive atmospheres).

CERAN AD PLUS

is a adhesive heavy duty grease designed for use on slide rails, metal cables, wire ropes, winches, small open gears and chains working under severe circumstances.

CERAN XM 460

is a multi purpose extreme pressure grease, formulated for the lubrication of all kinds of industrial, marine and off shore applications, operating under the most severe conditions. (water,heat, dust and other pollution).

CIRKAN RO

are mineral oils containing additives with appropriate viscosities for lubricating moving parts operating under severe temperature conditions: 

– fluid grades: systems operating at high speed: textile machinery, machine tools, and hydraulic circuits requiring a category HL oil.

– viscous grades: lubrication of bearings and gears not requiring anti-wear and extreme-pressure properties. 

DACNIS SH

Lubrication and cooling of the following types of air compressors:

– rotary screw compressors (ISO VG 32, 46, 68)

– reciprocating compressors (ISO VG 100).

CORTIS XHT 245

is a synthetic oil that is particularly suitable for lubricating moving parts operating at very high temperatures.

ISOVOLTINE II-T

is a Traced Inhibited Naphthenic base mineral oil for transformers, rheostats and circuit breakers using mineral oils.

LACTUCA LT 2 AP

is specially designed for traditional machining of copper alloys and bar turning. LACTUCA LT 3000 provides also full satisfaction for all operations on fine carbon steels.

MULTIS COMPLEX EP 2

is designed for the lubrication various applications in all types of operating conditions, but particularly where the operation temperature is high and the use of conventional lithium greases is limited.

MULTIS EP 00

is especially developed for the lubrication of closed gears, can also be used for chassis lubrication by means of a centralized system for which  NLGI 00 grade greases are recommended.

NATERIA MH 40

Lubrication of engines in power generation plants, with or without cogeneration, when the manufacturer requires an oil ash content up to 0.5 %.  

PRESLIA

specially designed for the lubrication of hydraulic, steam or gas turbines. They can also be used in centrifugal compressors or turbochargers.

RUBIA FLEET HD 200 SAE 40

Suitable for all turbocharged or normally aspirated Diesel engines of civil works machines, trucks, locomotives. Suitable for all Diesel stationary engines (energy production).

RUBIA TIR 7400  15W-40

Mineral lubricant suitable for on-road diesel engines.

WT SUPRA 

EQUIVIS ZS

recommended for all kind of hydraulic systems operating under high pressure (limit as indicated by the pump manufacturer) and high temperature.

Lubricants especially suitable for hydraulic systems working under extreme temperature variations and equipment operating outside : easy start up at low temperature and regular operating in all seasons : civil engineering, agriculture, marine, transport and other industrial applications.